Hello Guest it is July 22, 2019, 08:21:35 AM

Author Topic: MOTORS NOT WORKING PROPERLY  (Read 1735 times)

0 Members and 1 Guest are viewing this topic.

MOTORS NOT WORKING PROPERLY
« on: September 10, 2010, 03:55:36 PM »
THE Y AXIS DRIVE SOMETIMES HAS MICRO-SECONDS OF STOP.  THE MACHINE HAS NO BACKLASH RUNNING.  THE DRIVE COMES TO A COMPLETE MS STOP, AND THEN CONTINUES.

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: MOTORS NOT WORKING PROPERLY
« Reply #1 on: September 10, 2010, 04:06:45 PM »
Sounds like its a hardware issue. Check your wiring carefully then if that is ok the only real option is to swap around hardware from axis to axis to see if you can find the problem.
Hood
Re: MOTORS NOT WORKING PROPERLY
« Reply #2 on: September 10, 2010, 04:34:36 PM »
I'LL TRY IT ..... THANKS