Hello Guest it is November 30, 2021, 08:13:58 PM

Author Topic: X machine-Like  (Read 10568 times)

0 Members and 1 Guest are viewing this topic.

Re: X machine-Like
« Reply #10 on: August 27, 2010, 07:35:09 AM »
Amir,

That looks much more solid and rigid. Nice progress.

Dan
thx Dan
I think the changes implemented will be useful

Amir
**Even a clock that does not work is right twice a day**
Re: X machine-Like
« Reply #11 on: August 31, 2010, 09:26:13 AM »
update
**Even a clock that does not work is right twice a day**

Offline Dan13

*
  •  1,208 1,208
    • View Profile
    • DY Engineering
Re: X machine-Like
« Reply #12 on: August 31, 2010, 10:55:41 AM »
Nice visual effect on the last photo. How did you do this? Used a manual zoom lens? Or was it unintended?

Dan
Re: X machine-Like
« Reply #13 on: August 31, 2010, 12:58:27 PM »
Nice visual effect on the last photo.

Photoshop

Amir
**Even a clock that does not work is right twice a day**
Re: X machine-Like
« Reply #14 on: August 31, 2010, 10:58:38 PM »
Good going. What are the plans for the counter weights for the Z-axis.

Zafar
Re: X machine-Like
« Reply #15 on: September 01, 2010, 03:56:07 AM »
with Gas spring

Amir
**Even a clock that does not work is right twice a day**
Re: X machine-Like
« Reply #16 on: September 10, 2010, 04:24:21 PM »
i change design for Z axis.
I've decided that use DC motor (180V ,5A ,3300RPM ,1.2HP ) for spindle.

Amir
**Even a clock that does not work is right twice a day**

Offline Sam

*
  • *
  •  987 987
    • View Profile
    • hillbillyhilton.com
Re: X machine-Like
« Reply #17 on: September 10, 2010, 10:23:05 PM »
Looking nice, Amir. I wish I had a surface grinder that large! Those ball screws look very familiar, may I ask where your getting them? Thanks for sharing your project with us.
"CONFIDENCE: it's the feeling you experience before you fully understand the situation."
Re: X machine-Like
« Reply #18 on: September 11, 2010, 03:01:34 AM »
thx Sam
I dont remember where I talk about the ball screw even in the picture  ;D
BUT re ballscrew:
All equipment used in this project is related to the chip Mounter machine.
ballscrew used in X and Y is 14mm and pitch 2mm , for Z is 16mm and pitch 10mm.
all LM Guides is IKO and ballscrews is THK.

Amir
« Last Edit: September 11, 2010, 03:07:30 AM by manmeran »
**Even a clock that does not work is right twice a day**
Re: X machine-Like
« Reply #19 on: September 24, 2010, 08:15:04 AM »
After a long time ,Update
spindle build ER25 with 3 PFI ballbearing.
i use 2:1 pully between motor and spindle.about 6500RPM.


Amir
**Even a clock that does not work is right twice a day**