Hello Guest it is October 15, 2019, 08:34:20 PM

Author Topic: corners have radius at higher cut speed  (Read 1873 times)

0 Members and 1 Guest are viewing this topic.

corners have radius at higher cut speed
« on: July 22, 2010, 09:31:49 AM »
I am having trouble cutting sharp corners at speeds over approx. 10 IPM. If I go faster than that, the corners start to round. If I slow down, it returns to proper cutting. I would cut slower, but it is a pain if I have long strait runs in the same program. I hate having to continuously keep changing my cut speeds. Any help would be appreciated. Thank You!

Offline khalid

*
  •  213 213
    • View Profile
    • My Wood carving
Re: corners have radius at higher cut speed
« Reply #1 on: July 22, 2010, 10:10:28 AM »
I think you have CV mode on.. Just go to Config and change CV mode to Exact Stop mode..
Re: corners have radius at higher cut speed
« Reply #2 on: July 22, 2010, 10:19:29 AM »
That was it! So simple yet has been a pain in my butt for the last year. Thanks So MUCH!!!!