Hello
Guest
it is
April 19, 2024, 11:06:52 PM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
Mach Discussion
/
General Mach Discussion
/
how to test mach3 with parallel port pin?
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: how to test mach3 with parallel port pin? (Read 7490 times)
0 Members and 1 Guest are viewing this topic.
vominhkhai
3
how to test mach3 with parallel port pin?
«
on:
July 16, 2010, 10:45:44 PM »
hi, Im khai, i have question. How to test mach3 with parallel port pin. i have parallel port with LED. Mach3 run but i don't see led light.
Logged
Hood
25,835
Carnoustie, Scotland
Re: how to test mach3 with parallel port pin?
«
Reply #1 on:
July 17, 2010, 03:39:14 AM »
How have you got the LED connected?
When you say it runs do you mean Mach DROs change or do you mean you are you meaning you have motors connected and they run?
Is it an onboard parallel port or is it a PCI one?
Hood
Logged
vominhkhai
3
Re: how to test mach3 with parallel port pin?
«
Reply #2 on:
July 17, 2010, 04:13:11 AM »
I'm connect to led with LPT gate ( gate printer).
I don't know signal out put of mach to LPT gate. You can answer the question to me.
thanks
Logged
vominhkhai
3
Re: how to test mach3 with parallel port pin?
«
Reply #3 on:
July 17, 2010, 04:44:12 AM »
i don't know Where the diagnostics page shows outputs on the step and direction pins? I just saw 8 led-on ( at port 1 pin current state, that are ground). mach3 to run when it is just 8 LED scroll on while Dro
Logged
Print
Pages:
1
Go Up
« previous
next »