The x-axis stuttered, so then I plugged the X cable into another motor, then the y-Axis motor started stuttering.
Problem doesn't appear to be related to the motor.
I then swapped Cables, using a previous good cable and a "good" motor into the x-axis of the driver board....Still bad stuttering.
Problem appears regardless of what motor Or cable I use.
Hood, when you say swap the drivers around, do you mean for me to take out the driver chip from my X and put in my Y chip?
Because I also replaced the X Axis chip in the driver board, but this didn't help ether.
I also played with the motor pulse direction values & confirmed that the keyboard is mapped correctly for jogging direction, after all, it sometimes does go in the right direction.
Tom