so, will that mean you will show a pic of all three together, so the entire picture can be shown? also, I understand what your saying, but please realize that some of the keyboard functions are dependant on the existance of the other Keyboards, so the reality, is they where designed that way from the begining, the only reason I seperated them into 3, 4x4 units, is you told me it was cheaper to manufacture 4x4's (as they are common), verses a single 4x12.
I am calling the Plugin "Mach_CNC_Keys0.dll" (I think it would be a good idea to call the overal keys "Mach CNC Keys").
Again, PLEASE also put up a price that is for ALL 3 of the boards together, and I would recommend a full turn key package that would be the 3 boards, PLUS the PKMB you sell that connect it all together.
The Full Plugin is done and tested here, to include the Matrix LED functions, it all works good. I have "Disabled" the Use Matrix LEDs function AS it applies to the CNC Keys. So this current version will be 10.1 that is for CNC keys without LEDs embedded in the Keys. When you have a CNC Keys WITH the LED done and sent to me for final testing, I will Re-Enable the Use Matrix CNC LEDs function, and that version will be 10.2.
On the CNC Keys you send me, (the one with the LEDs embedded in the keys), PLEASE send me a Non-Prototype one, that has the Keyboard Graphics sticky to lie flat, not the prototype you sent the graphics sticky, you can see the "Bumps" of the circuits that stick up above the PCB, and thus make it look like ugle Air bubbles are under the sticky.
scott