Sorry, it's a board deigned for a electronic teacher in Argentina, he designed his own software to drive it, he doesn't know if works with Mach 3.
My problem is,
Iam building a cnc embroider machine, from
www.cnczone.com and I need a cheap and small cnc controller, in the web are many controllers plans, but many are too complicated for this single project. That than I send yoo is very simple to build. Give the option of half stept, and inputs. Finally I must discard this project because I don't want spend money in something not useful. If project is a router for example is valid a good controller buy or diy.
CNC controlled embroider, needs a little torque steppers, because only move hood and fabric. For that reason controller should be very small and simple.
If you or someone in forum , can sugest me a controller like a need. I'll be grateful
thanks in advance, and sorry my bad english
rene
Links for this controller is----
www.r-luis.xbot.es