Hello Guest it is May 30, 2023, 12:34:30 AM

Author Topic: A tear in my eye  (Read 3084 times)

0 Members and 1 Guest are viewing this topic.

A tear in my eye
« on: October 01, 2006, 08:00:20 PM »
After many long nites in the garage i finally have movement. ( IT'S ALIVE) While i have a coulpe of small problems to deal with my question is, How do you control the feed speed? I read the manual several times but im just not getting it. Is it in the tool table or am i missing something.

Offline Chip

  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: A tear in my eye
« Reply #1 on: October 01, 2006, 11:46:58 PM »
Hi, JDolecki

On Program Run screen Clock on F window set there enter key after + - Reset.

TAB key, screen jog  keys and other item's

Gcode, G01 x1 y1 F25 the f sets the speed.

Hope this Helps, Chip


Re: A tear in my eye
« Reply #2 on: October 02, 2006, 03:46:58 AM »
You have every right to have a tear. Its a terrific feeling when you finally see this thing you have been working on for so long, actually work.
Good job.