Hello Guest it is March 28, 2024, 12:38:49 PM

Author Topic: PROBLEM WITH FEED  (Read 2813 times)

0 Members and 1 Guest are viewing this topic.

PROBLEM WITH FEED
« on: March 09, 2010, 10:45:16 AM »
Hi!! every one,
I have a problem with a feed went working together   Z/Y or Z/X  axis,machine move too slow,Can I change any setting to be work
with more feeding speed?
Thanks for help,Eugenio

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: PROBLEM WITH FEED
« Reply #1 on: March 09, 2010, 11:09:59 AM »
What are the motor tuning settings for your axis? Sounds like the Z is very slow and slower than the feedrate you are wanting to go at.
Hood
Re: PROBLEM WITH FEED
« Reply #2 on: March 16, 2010, 01:33:05 PM »
Hi,Hood.The motor tuning are setting to max on all axis,I think that maybe is on paramet but i dont now how to work
with that.
thanks,have good day,Eugenio
Re: PROBLEM WITH FEED
« Reply #3 on: March 16, 2010, 02:35:49 PM »
Eugenio

Hood is asking for these parameters they are under config/motor tuning

Phil
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable