Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: master on March 09, 2010, 10:45:16 AM

Title: PROBLEM WITH FEED
Post by: master on March 09, 2010, 10:45:16 AM

Hi!! every one,
I have a problem with a feed went working together   Z/Y or Z/X  axis,machine move too slow,Can I change any setting to be work
with more feeding speed?
Thanks for help,Eugenio

Title: Re: PROBLEM WITH FEED
Post by: Hood on March 09, 2010, 11:09:59 AM

What are the motor tuning settings for your axis? Sounds like the Z is very slow and slower than the feedrate you are wanting to go at.
Hood

Title: Re: PROBLEM WITH FEED
Post by: master on March 16, 2010, 01:33:05 PM

Hi,Hood.The motor tuning are setting to max on all axis,I think that maybe is on paramet but i dont now how to work
with that.
thanks,have good day,Eugenio

Title: Re: PROBLEM WITH FEED
Post by: M250cnc on March 16, 2010, 02:35:49 PM

Eugenio

Hood is asking for these parameters they are under config/motor tuning

Phil