Hello
Guest
it is
April 26, 2024, 03:15:06 PM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
G-Code, CAD, and CAM
/
G-Code, CAD, and CAM discussions
/
G28.1 HOMING
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: G28.1 HOMING (Read 4683 times)
0 Members and 1 Guest are viewing this topic.
riporeno
48
G28.1 HOMING
«
on:
March 07, 2010, 03:30:55 AM »
hi
I would like to make the homing with the gcode.
I have written G28.1 but it doesn't work.
Where am I wrong?
thanks
moreno
Logged
Overloaded
4,922
Re: G28.1 HOMING
«
Reply #1 on:
March 07, 2010, 08:04:11 AM »
Maybe you are not entering complete information.
Try
G28.1 X1 Y1 Z-1
Logged
riporeno
48
Re: G28.1 HOMING
«
Reply #2 on:
March 07, 2010, 08:21:51 AM »
ok thanks.
I now try.
hi
moreno
Logged
Graham Waterworth
2,673
Yorkshire Dales, England
Re: G28.1 HOMING
«
Reply #3 on:
March 07, 2010, 08:34:30 AM »
G28.1 X0 Y0 Z0 searches for the home position
G28 X0 Y0 Z0 goes to a known home position
Graham
Logged
Without engineers the world stops
scrambled
129
Re: G28.1 HOMING
«
Reply #4 on:
May 20, 2010, 02:28:26 AM »
Graham-
when you say that Mach searches for a known home position, is that the same as the reference position?
Steve
Logged
riporeno
48
Re: G28.1 HOMING
«
Reply #5 on:
May 20, 2010, 02:23:00 PM »
with the G28.1 the machine goes on the switches of home.
don't confuse with the origin piece.
regards
moreno
Logged
Print
Pages:
1
Go Up
« previous
next »