Author Topic: G28.1 HOMING  (Read 3666 times)

0 Members and 1 Guest are viewing this topic.

Offline riporeno

  • Active Member
  • Posts: 48
    • View Profile
G28.1 HOMING
« on: March 07, 2010, 03:30:55 AM »
hi   
I would like to make the homing with the gcode. 
I have written G28.1 but it doesn't work. 
Where am I wrong? 
thanks 
moreno

Offline Overloaded

  • Global Moderator
  • *
  • Posts: 4,773
    • View Profile
Re: G28.1 HOMING
« Reply #1 on: March 07, 2010, 08:04:11 AM »
Maybe you are not entering complete information.
Try
G28.1 X1 Y1 Z-1

Offline riporeno

  • Active Member
  • Posts: 48
    • View Profile
Re: G28.1 HOMING
« Reply #2 on: March 07, 2010, 08:21:51 AM »
ok thanks.   :)
I now try. 
hi 
moreno

Offline Graham Waterworth

  • Administrator
  • *
  • Posts: 1,845
  • West Yorkshire, England
    • View Profile
    • Autovalues Engineering
Re: G28.1 HOMING
« Reply #3 on: March 07, 2010, 08:34:30 AM »
G28.1 X0 Y0 Z0 searches for the home position

G28 X0 Y0 Z0 goes to a known home position

Graham
G-Code is on the cutting edge

Autovalues Engineering, CNC machining specialists, Bradford, England

Offline scrambled

  • Active Member
  • Posts: 122
    • View Profile
Re: G28.1 HOMING
« Reply #4 on: May 20, 2010, 02:28:26 AM »
Graham-

when you say that Mach searches for a known home position, is that the same as the reference position?

Steve

Offline riporeno

  • Active Member
  • Posts: 48
    • View Profile
Re: G28.1 HOMING
« Reply #5 on: May 20, 2010, 02:23:00 PM »
with the G28.1 the machine goes on the switches of home. 
 
don't confuse with the origin piece. 
 
regards 
 
moreno