Hello
Guest
it is
March 29, 2024, 12:40:23 AM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
Mach Discussion
/
General Mach Discussion
/
GO TO zero
« previous
next »
Print
Pages:
1
2
»
Go Down
Author
Topic: GO TO zero (Read 6747 times)
0 Members and 1 Guest are viewing this topic.
pavlic28
11
GO TO zero
«
on:
March 02, 2010, 03:25:06 PM »
Hi guys!
I am using DSPMC/IP controller with servo motors.It is a milling machine. I have one problem. When I press "GO TO Z" button the machine allways go to this position:
X=0.545
Y=0.351
Z=0.045
Why dont the axis go in to the 0.000 position?
Logged
Hood
25,835
Carnoustie, Scotland
Re: GO TO zero
«
Reply #1 on:
March 02, 2010, 04:24:47 PM »
Could you be looking at machine coords? The GoToZero button will take you to your work offset zero, so if viewing machine coords you will not see where it is.
Hood
Logged
pavlic28
11
Re: GO TO zero
«
Reply #2 on:
March 03, 2010, 06:27:33 AM »
No, I had already checked that. Are there some other configurations?
Thanks
Logged
Hood
25,835
Carnoustie, Scotland
Re: GO TO zero
«
Reply #3 on:
March 03, 2010, 06:56:00 AM »
Not that I know of, sounds like it may be a DSPMC issue. If you command a G0X0Y0Z0 move does it go to zero?
Hood
Logged
pavlic28
11
Re: GO TO zero
«
Reply #4 on:
March 03, 2010, 08:26:51 AM »
When i push the zero button or if I put X0.0 Y0.0 Z0.0 coordinates in to the G code it is always go in to the position that I describe in first post.
Logged
Hood
25,835
Carnoustie, Scotland
Re: GO TO zero
«
Reply #5 on:
March 03, 2010, 01:39:49 PM »
If you want to attach your xml I can have a look at it to see if I can see anything wrong but I think you will really need to contact the DSPMC people and see if they can suggest anything.
Hood
Logged
pavlic28
11
Re: GO TO zero
«
Reply #6 on:
March 04, 2010, 02:16:37 PM »
This is the dspmc file.
thank you!
Logged
Hood
25,835
Carnoustie, Scotland
Re: GO TO zero
«
Reply #7 on:
March 04, 2010, 02:19:45 PM »
Afraid that seems to be a blank xml you have attached.
Hood
Logged
pavlic28
11
Re: GO TO zero
«
Reply #8 on:
March 05, 2010, 01:50:39 AM »
I can normally open it with the Internet explorer 6.0
Logged
Hood
25,835
Carnoustie, Scotland
Re: GO TO zero
«
Reply #9 on:
March 05, 2010, 02:14:56 AM »
The xml you sent is a blankl.
Hood
Logged
Print
Pages:
1
2
»
Go Up
« previous
next »