Hello Guest it is March 28, 2024, 08:44:58 PM

Author Topic: Mach 3 Turn Wizards  (Read 3735 times)

0 Members and 1 Guest are viewing this topic.

Mach 3 Turn Wizards
« on: February 22, 2010, 04:35:49 AM »
Just started using Mach3 on a CNC lathe. I am having problems when running G Code created using the lathe turning wizards. I have found that the M3 generated by the wizard does not activate the dwell I have set for the spindle and the spindle eventually stops during execution of the G Code. If I edit the M3 to M4 and save the G Code, eveything runs as expected.
Anyone experienced this or have any clues to what is going on.

Bazzag

Offline zarzul

*
  •  232 232
  • Wyoming, USA
    • View Profile
Re: Mach 3 Turn Wizards
« Reply #1 on: March 02, 2010, 12:36:17 PM »
go into the configuration - ports & pins - spindle - change the m3 & m4 output#'s
or go to the outputs and change the pin numbers for outputs, usually #1 & #2  to correspond to your machine.