Hey folks, I know you like to see projects prestained, so here goes the 'No Moon' series that I did. I'll be staining it tonight and mounting for display. These are the first real art pieces done on my mill. Everything before it was just a test. I did it using a 3/8 inch roughing bit, and a 1/8 inche finishing end mill. The stepover for finishing was .25 mm. I had the feed rate set to 600, but I could probably do more. My plunge was set to 90, so the pieces with a lot of up and down took longer. Each piece is 6 inches square. I think I've proven that my mill works, at least in 3 axis;)
Barry