Hello Guest it is July 11, 2020, 05:32:15 PM

Author Topic: Drive Reccomendation?  (Read 2057 times)

0 Members and 1 Guest are viewing this topic.

Drive Reccomendation?
« on: February 08, 2010, 06:11:27 PM »
I am thinking about doing a retrofit of a gang style lathe that has 2 100 Volt DC servo drives rated at 6A continuous and 36A peak current.  I was thinking of doing it with a smooth stepper and replacing the drives.  Does anyone know of cost-effective drives that would work well for this application?  I am hoping to find something that has position following error detection.

Thanks,

Bill
Re: Drive Reccomendation?
« Reply #1 on: February 08, 2010, 06:34:09 PM »
Hi,

Have a look at the drives from cncdrive http://www.cncdrive.com/

They have had good reports.

Cheers,

Peter.
----------------------------------------------------
Homann Designs
http://www.homanndesigns.com
email: peter at homanndesigns.com
Re: Drive Reccomendation?
« Reply #2 on: March 03, 2010, 03:06:12 PM »
Thanks,

Bill