Hello Guest it is December 06, 2019, 12:32:20 AM

Author Topic: Changed kernal speed, no more motor movement!!  (Read 2321 times)

0 Members and 1 Guest are viewing this topic.

Changed kernal speed, no more motor movement!!
« on: February 01, 2010, 03:47:41 PM »
I've just upgraded my spindle motor to a servo motor, while doing so I needed to increase my kernal speed.
I then restarted Mach3, opened motor tuning and nothing, No movement from X,Y,Z or spindle.
So i changed it back and still nothing. I closed Mach3 Mill and opened Plasma profile and was able to move X and Y but not Z.
I'm really stumped, I'm about to reinstall Mach but first wanted to see if anyone has any idea what could be wrong.

Thanks

Ryan
Re: Changed kernal speed, no more motor movement!!
« Reply #1 on: February 01, 2010, 03:56:48 PM »
I foregot to mention that I'm running a licenced version of  3.042.02.

Thanks

Ryan