Machsupport Forum

Mach Discussion => Mach3 under Vista => Topic started by: Rptdream on February 01, 2010, 03:47:41 PM

Title: Changed kernal speed, no more motor movement!!
Post by: Rptdream on February 01, 2010, 03:47:41 PM

I've just upgraded my spindle motor to a servo motor, while doing so I needed to increase my kernal speed.
I then restarted Mach3, opened motor tuning and nothing, No movement from X,Y,Z or spindle.
So i changed it back and still nothing. I closed Mach3 Mill and opened Plasma profile and was able to move X and Y but not Z.
I'm really stumped, I'm about to reinstall Mach but first wanted to see if anyone has any idea what could be wrong.

Thanks

Ryan

Title: Re: Changed kernal speed, no more motor movement!!
Post by: Rptdream on February 01, 2010, 03:56:48 PM

I foregot to mention that I'm running a licenced version of  3.042.02.

Thanks

Ryan