Hello Guest it is November 10, 2024, 09:22:38 AM

Author Topic: SHUTTLE PRO2  (Read 3648 times)

0 Members and 1 Guest are viewing this topic.

Offline tipit

*
  •  22 22
SHUTTLE PRO2
« on: January 07, 2010, 12:35:21 PM »
Hi, I am having problem with my Shuttle, I have configured one of the buttons to REF ALL, Does this button have the same function that the one on the Mach3 Screen, ounce you hit it, the one on the screen, the Z Axis moves up then the X and the Y moves to home.

With the shuttle it moves more or less like you hit GO TO ZERO with the exception that the Z axis moves toward the home limit (Diagonally instead of straight up) at the same time as the X and Y while the X and Y are moving.
Is this normal
Thank you
Re: SHUTTLE PRO2
« Reply #1 on: February 19, 2010, 11:18:32 AM »
I've set up a Shuttle Pro2 with Mach 3 and my Taig milling machine.

I just wondered how to configure each of the keys and how other users used theirs!

It seems like a nice device and being able to control the machine and reset axis from a hardware device is much more convenient than navigating and clicking in mach3.