Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: tipit on January 07, 2010, 12:35:21 PM

Title: SHUTTLE PRO2
Post by: tipit on January 07, 2010, 12:35:21 PM
Hi, I am having problem with my Shuttle, I have configured one of the buttons to REF ALL, Does this button have the same function that the one on the Mach3 Screen, ounce you hit it, the one on the screen, the Z Axis moves up then the X and the Y moves to home.

With the shuttle it moves more or less like you hit GO TO ZERO with the exception that the Z axis moves toward the home limit (Diagonally instead of straight up) at the same time as the X and Y while the X and Y are moving.
Is this normal
Thank you
Title: Re: SHUTTLE PRO2
Post by: alan2525 on February 19, 2010, 11:18:32 AM
I've set up a Shuttle Pro2 with Mach 3 and my Taig milling machine.

I just wondered how to configure each of the keys and how other users used theirs!

It seems like a nice device and being able to control the machine and reset axis from a hardware device is much more convenient than navigating and clicking in mach3.