I'm trying to get up and running with Mach3 after years of using CNCPro for DOS.
My machine is used manually on occasion (usually for initial positioning) and to facilitate this, I devote three PPort output pins to enable or disable an individual axis in the controller box. With CNCPro, controlling these outputs is easy, as is labeling them appropriately.
From my reading, it looks like I can create my own screenset to do this in Mach3 (I have no need to computer-control the coolant or the spindle). Frankly, though, I want to get started USING Mach3, not trying to learn how to create screensets for a program I don't know how to use in the first place.
Is there a generic screenset with buttons like Output1, Output2 and so on?
Thanks.
Alan