Hello Guest it is March 28, 2024, 04:25:40 PM

Author Topic: Boxford tcl125  (Read 2943 times)

0 Members and 1 Guest are viewing this topic.

Boxford tcl125
« on: November 13, 2009, 09:36:48 AM »
Can anyone tell me what they have used succesfully to control the spindle of a boxford tcl125,both driving it and deriving spindle speed etc for threading.

And can anyone tell how the turret operates on the boxford and explain how to drive it through that glorious application known as Mach3.

Offline Graham Waterworth

*
  • *
  •  2,668 2,668
  • Yorkshire Dales, England
    • View Profile
Re: Boxford tcl125
« Reply #1 on: November 13, 2009, 11:23:43 AM »
Have a look here :-

http://www.cncdoctor.co.uk/15.html

Graham
Without engineers the world stops
Re: Boxford tcl125
« Reply #2 on: November 13, 2009, 11:30:29 AM »
Thanks for that , but unfortunately I have tried to get them to ring me over the last couple of days because they have no number listed. They are obviously to busy to respond so I was hoping there might be another way.

Thanks again.