Hello Guest it is October 15, 2019, 10:19:02 AM

Author Topic: Galil  (Read 3661 times)

0 Members and 1 Guest are viewing this topic.

Galil
« on: September 07, 2006, 12:52:44 AM »
I am very interested in the progress being made on a Galil compatible Mach. Can we get a teaser or two?

Shawn
Re: Galil
« Reply #1 on: September 12, 2006, 10:29:49 AM »
I just got back and in a few days we will start workign on the Galil.. I hope to have something done in a few weeks :)
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Galil
« Reply #2 on: September 14, 2006, 12:23:13 AM »
Anyone else out there going to be using Mach with a Galil when it is operational?

Re: Galil
« Reply #3 on: September 14, 2006, 07:08:47 AM »
The hardware should be up to Art very soon... I shipped it out before I went to IMTS... Once Art has it we will start back in on it :) (I do still have mine talking to me ).
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: Galil
« Reply #4 on: September 19, 2006, 09:17:05 AM »
Hi,

I am in the middle of sourcing components for my 9x30 lathe retrofit. This is
my first experience with such a project so I am pretty ignorant though learning allot.

I am looking to control the x, z axis as well as the c for use with live tooling.
Art says Mach3 can not control the spindle in G Mode with Grex, he is waiting
on a firmware upgrade.

I have been scoping out the Galil videos, hunting for alternate solutions. Anybody
know if this would be possible with Galil.

Thanks,

Jorge
Re: Galil
« Reply #5 on: September 19, 2006, 07:40:27 PM »
We will know more after we get it running ;)

If that will not work we are also working on a deal with Delta Tau!
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com