Hello Guest it is March 28, 2024, 05:31:16 PM

Author Topic: Can Mach3 use G43?  (Read 4680 times)

0 Members and 1 Guest are viewing this topic.

Can Mach3 use G43?
« on: October 14, 2009, 01:51:56 PM »
Sorry if its a silly question... I'm helping a friend with some programs... I use a cam system here at work and I posted some programs out for him to try using my generic Fanuc post. Everything seems to work OK, but I would like to incorperate tool changes, even if they are manual.
Does Mach3 support tool offsets using the G43 along with the H#

Example:
M3T6 (msg,3/16"ball)
G43Z1.H6


H6 being a record in an offset table like on a Fanuc 18m control?

Offline Dan13

*
  •  1,208 1,208
    • View Profile
    • DY Engineering
Re: Can Mach3 use G43?
« Reply #1 on: October 15, 2009, 03:49:20 AM »
Hi,

Mach3 does support G43 like in your example.

Daniel