Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: _DK_ on October 14, 2009, 01:51:56 PM
-
Sorry if its a silly question... I'm helping a friend with some programs... I use a cam system here at work and I posted some programs out for him to try using my generic Fanuc post. Everything seems to work OK, but I would like to incorperate tool changes, even if they are manual.
Does Mach3 support tool offsets using the G43 along with the H#
Example:
M3T6 (msg,3/16"ball)
G43Z1.H6
H6 being a record in an offset table like on a Fanuc 18m control?
-
Hi,
Mach3 does support G43 like in your example.
Daniel