Hello Guest it is March 29, 2024, 03:29:00 AM

Author Topic: LazyCam ver 2.64 and G(Mode) generation of G41, G42  (Read 14026 times)

0 Members and 1 Guest are viewing this topic.

Re: LazyCam ver 2.64 and G(Mode) generation of G41, G42
« Reply #20 on: October 26, 2006, 01:52:58 AM »
Hi Brian,

Please, take a look at LazyCam 2.66 as it does not work on Vdrill. It crashes each time.

Thank you.

Zoltan

Re: LazyCam ver 2.64 and G(Mode) generation of G41, G42
« Reply #21 on: October 27, 2006, 11:35:56 AM »
we are working on a new rev and it is on the list :)

Thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: LazyCam ver 2.64 and G(Mode) generation of G41, G42
« Reply #22 on: October 27, 2006, 01:58:10 PM »
Hi Brian,

Bug report:

If I import a CAD-file and want to move the origin point my LC crashes with the following error:


Greetings from Germany

Wolfram

Re: LazyCam ver 2.64 and G(Mode) generation of G41, G42
« Reply #23 on: October 27, 2006, 04:34:20 PM »
Hi Brian,

Problem found:

Ive tested LC on sev. Computers...
No problem on my Mach-PC at my machine, no problem at my laptop with 1024 x 768 pixels..
But:
On my Developer - Desktop (Matrox Parhelia G650 with first Display Sony 24 Inch 16:10 and 1600 x 1000 Pixel, second Display Dell 24 Inch TFT 16:10 with 1920 x1200 Pixel)
the problems appears only at 32 Bit Color Depth....
If I change it back to 16 Bit LC runs fine at the Sony Display, without crash on the Dell, but with problems at the viewing area....

Hope that is helpful for your debugging...

Greetings from Germany

Wolfram
Re: LazyCam ver 2.64 and G(Mode) generation of G41, G42
« Reply #24 on: October 27, 2006, 09:38:26 PM »
Thank you that is a very big help!!!
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: LazyCam ver 2.64 and G(Mode) generation of G41, G42
« Reply #25 on: December 06, 2006, 12:38:44 PM »
Someone, helppppppppp

I was using my mill today and the x axis suddenly stopped working, I tell Mach 2 to move it but it just won't...............HELPPPPP
Re: LazyCam ver 2.64 and G(Mode) generation of G41, G42
« Reply #26 on: December 07, 2006, 10:30:46 PM »
Check for a bad drive and were the DRO's still moving?
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com