Hello Guest it is September 26, 2023, 02:44:24 AM

Author Topic: New Questions from Stringkilla  (Read 3186 times)

0 Members and 1 Guest are viewing this topic.

New Questions from Stringkilla
« on: January 08, 2006, 02:24:55 PM »
Hi guys. Now that I have Mill I have some other questions.
So guys, I watched the video on coordinates and I got that to set up the machine coord's and home coord's I need to have the wired up, correct. So I need help with this wiring diagram. I want to mount a switch at each end of the X and Y axis and one at the top of Z axis. I believe I need to wire the X, and Y switches in series but I'm not sure, since the switches have three lugs. I have four Radio Shack #275-017A switches, rated 125/250 vac. How do I wire them up in series
« Last Edit: January 09, 2006, 02:02:58 PM by stringkilla »


Re: Questions from Stringkilla
« Reply #1 on: January 08, 2006, 08:31:28 PM »
String The Estop depends on how you want to use the Estop.

If you only want to alert Mach by using the estop pin, then you only need 1

If you want to alert mach and open a contactor to kill the power input you will need 2 or use one of machs output pins to trip the contactor thru a relay.
Re: Questions from Stringkilla
« Reply #2 on: January 08, 2006, 08:55:05 PM »
Cool, I have an other project that I am working on and that could fit in!

Fixing problems one post at a time ;)