I think I am right to say this one is a bug. We will see when someone shows me my error.
Very simple gcode as follows,
G1 X0 Y0 Z50 A0
A360
Z40
A0
Z30
A360
M30
%
When the "axis of rotation" is selected as X, in toolpath configuration, the toolpath displays correctly. See pic X-rotation
However when Y is selected, then the toolpath view is not displayed correctly. See pic Y-rotation
They should both show three simple rotations of the axis. As the "X-rotation" pic does.
Any ideas of what silly thing I may be missing.
Greg