Hello Guest it is September 23, 2023, 04:05:29 AM

Author Topic: estop w/high rebounce still shuts down machine.  (Read 2684 times)

0 Members and 1 Guest are viewing this topic.

estop w/high rebounce still shuts down machine.
« on: September 03, 2006, 12:04:17 PM »

I've searched the forum and found several other people who have had the estop issue happening randomly.  I'm having the same issue and I tried increasing the rebounce setting incrementally, 1000, 1500, 2000.  It's still happening so I figured lets go to an extreme, 10000 and then 20000, it's still happening.  Does anyone have any other suggestions I might try to keep the machine running? 

I've been running the same programs for the last several month and everything has been fine.  All of a sudden, yesterday it started estopping for no reason at all.

Thanks for any help.

Offline zealous

  •  489 489
  • HI!
    • View Profile
    • Artsoft Solutions
Re: estop w/high rebounce still shuts down machine.
« Reply #1 on: September 04, 2006, 04:43:32 AM »
Sound like a bad limit switch, but you could try turning off "Watch dog", "Enhance pulsing" and do a "Adaware" scan.
Check out: