The Emcocturn 320 I bought was unpowered, and priced accordingly. I got a good deal on it. Since it had sat for so long unpowered, the batteries went dead and all of the default parameters were lost. The machine needs to be "recommissioned" (the term Emco uses to input all of the Fanuc OTB's default parameters.) When I powered it up I got a servo fault on the X and Z axis 417 and 427.
Emco has sent me a pdf on how to recommission the machine, but I have yet to receive the parameter file I have to upload to it. They want $700 for a one year support contract if I needed any additional help but they did promise to send me the file. Still waiting so we shall see. Retrofit/Mach3 is plan B if this all falls through.
If I could find another identical machine I could download all of the parameters from, that would be ideal.
Tool nose radius compensation is not an issue for me, since most cam packages will do that for you.