0 Members and 1 Guest are viewing this topic.
he probably just clicked the G Code button in Mach.Hood
The Mach3 Turn - Arc Motion write up in Members Docs provides definiton and has examples of arcs in different positions. For the lathe but still basic good info that you can adjust for the mill.RICH
Quote from: RICH on August 23, 2009, 10:13:55 AMThe Mach3 Turn - Arc Motion write up in Members Docs provides definiton and has examples of arcs in different positions. For the lathe but still basic good info that you can adjust for the mill.RICHWhat is Members Docs?Nicolas