Hello Guest it is March 28, 2024, 01:46:14 PM

Author Topic: How to install Dolphin CAD/CAM post processor file  (Read 4132 times)

0 Members and 1 Guest are viewing this topic.

How to install Dolphin CAD/CAM post processor file
« on: August 13, 2009, 11:45:38 PM »
Tried to find in forum but no luck.  Can anyone tell me how to install the Dolphin CAD/CAM post processor file I downloaded from the Artsoft web site so that it works with Mach 3 and Dolphin CAD/CAM?

Thanks

Ed

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: How to install Dolphin CAD/CAM post processor file
« Reply #1 on: August 13, 2009, 11:55:56 PM »
You may want to try using the Fanuc one and there are specific ones for the lathe that you can download
from the Dolphin site. I don't really remember but the one from this site didn't didn't work very well .
Oh, think you just copy it to one of the directories of Dolphin.
RICH
Re: How to install Dolphin CAD/CAM post processor file
« Reply #2 on: August 14, 2009, 10:17:21 AM »
Thanks Rich, I'll go to Dolphin site and look for their post processor file and see if info can be found on installing it there. 

Ed