Hello Guest it is March 29, 2024, 05:11:36 AM

Author Topic: New to Mach3 Turn, need help with tool table  (Read 14306 times)

0 Members and 1 Guest are viewing this topic.

Re: New to Mach3 Turn, need help with tool table
« Reply #10 on: July 25, 2009, 02:50:51 PM »
Copied the LazyTurn execute file to the LazyCAM folder and LazyTurn now loads but it is version 1.  The manual directs me to lazyturn thread, reply $1056, page 106 for a different version.  I downloaded it and put it is the folder with LazyCAM but when I try to start it I get and error: This application has failed to start because sgCore.dll was not found.  How do I fix this?  What is the most current version of LazyTurn program?

Ed

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: New to Mach3 Turn, need help with tool table
« Reply #11 on: July 25, 2009, 03:31:13 PM »
LazyTurn installation:

Go top the "DOWNLOADS" very top of screen>Mach & Lazycam, Then download Lazycam v3.00.2 and also the
Update. Install v3.00.2 and then install the update. ( I happen to install them to a seperate directory called Lazyturn)

The latest lazyturn exe file is in this post ( sorry manual a little out of date ):  Download the file to say c:/AAAA
and extract it to the that directory.  Just copy the exe file to the LazyTurn fOLDER  and say yes to replace the other exe file.

Page 107 - reply #1067
http://www.machsupport.com/forum/index.php/topic,5767.msg74320.html#msg74320

NOTE: LC v3.00.2 UPDATE just updates the installed LazyCam for additional or specific file for LazyTurn.
The other file is just the latest update for LazyTurn. Oh BTW....you may want create a  shortcut to it.

Hope I got it right,
RICH
« Last Edit: July 25, 2009, 03:33:02 PM by RICH »

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: New to Mach3 Turn, need help with tool table
« Reply #12 on: July 25, 2009, 03:33:19 PM »
Hi, Ed

I sent you a PM message, top of this screen by your user name pic 1.

Ver 1.1 is most current post #1067 , Did you install LazyCam Update from the downloads page, You may need this also pic3.

Chip
« Last Edit: July 25, 2009, 03:35:26 PM by Chip »
Re: New to Mach3 Turn, need help with tool table
« Reply #13 on: July 26, 2009, 11:25:18 AM »
Thanks to all who replied especially Chip.  He went out of his way to help me resolve this strange issue.  I had followed all of the instructions for setting this up and was still having problems.  Seems that the LazyCam update failed 2 times and didn't load a dll file that was needed.  WithChip's help this issue was resolved and now LazyTurn is working just fine and even looks like the screen pics in the manual.  Thanks a lot Chip, this forum is really lucky to have people like you who are willing to help someone in need of assistance.

Ed
« Last Edit: July 26, 2009, 11:27:23 AM by yakfisherman »