Hello Guest it is March 28, 2024, 07:04:20 PM

Author Topic: How to Home a Single Axis  (Read 2842 times)

0 Members and 1 Guest are viewing this topic.

How to Home a Single Axis
« on: July 02, 2009, 06:03:11 PM »
How can I home a single axis, not just G53 Z0 for example, but home it like when I first start the machine and it hits the home limit switch and rebounds and then zeros out the Machine Coordiantes for that axis. Thanks.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: How to Home a Single Axis
« Reply #1 on: July 02, 2009, 06:17:59 PM »
Diagnostics page has individual ref buttons.
Hood
Re: How to Home a Single Axis
« Reply #2 on: July 02, 2009, 06:23:58 PM »
Sweet, thanks. Of course all this info over the years takes time to absorb, the funny thing is it's on my list of things to do to read over the different things on different mach screens. Thanks again.