Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Cartierusm on July 02, 2009, 06:03:11 PM

Title: How to Home a Single Axis
Post by: Cartierusm on July 02, 2009, 06:03:11 PM
How can I home a single axis, not just G53 Z0 for example, but home it like when I first start the machine and it hits the home limit switch and rebounds and then zeros out the Machine Coordiantes for that axis. Thanks.
Title: Re: How to Home a Single Axis
Post by: Hood on July 02, 2009, 06:17:59 PM
Diagnostics page has individual ref buttons.
Hood
Title: Re: How to Home a Single Axis
Post by: Cartierusm on July 02, 2009, 06:23:58 PM
Sweet, thanks. Of course all this info over the years takes time to absorb, the funny thing is it's on my list of things to do to read over the different things on different mach screens. Thanks again.