Hello Guest it is March 28, 2024, 03:45:45 PM

Author Topic: saving spindle auto calibration  (Read 2743 times)

0 Members and 1 Guest are viewing this topic.

saving spindle auto calibration
« on: July 01, 2009, 09:53:53 PM »
After running the spindle  calibration is there anyway to save the setting so it doesnt have to be run each time mach is launched? I have clicked the save setting box that pops up when done and clicked save settings from the pull down menu  but everytime I launch mach it seems I need to run the spindle auto calibrate routine

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: saving spindle auto calibration
« Reply #1 on: July 02, 2009, 06:46:06 AM »
Afraid I have never used the calibration as its servos I have on the spindle but just curious if this is with the SS or PP?
Hood
Re: saving spindle auto calibration
« Reply #2 on: July 02, 2009, 09:31:38 AM »
with smooth stepper, spindle is spot on after I calibrate and good up until I shut down and restart mach , then has to be recalibrated