Well, I looked over the probing source code and discussed it with Art last night......
Here is what Art says for you probers that are getting the double points to try first!!!!:
Art Fenerty:
"tell those that get double points to use a larger pullback...
reversals shoudl be 1.. but has a max of five, then it fails.. so larger pullback.. if no double points then thats whats causing it..
as I recall anyway.."
So, set your pull back to a larger value, (or even much larger), and then see if it clears up, if it does clear up, then thats the issue, and you can then reduce the pull back, until you see the double points again, then increase slightly.
NOTE: If that fails to resolve the problem, I did find a section of code that could potentially be the "culprit", Art IS aware of the section, so he thinks that the pull back is the issue.
scott