OK, so I'm sure it's been covered but I can't find it.
I'm using the threading wizard in Mach 3.042 and when I go to run it, it move the carriage past the physical limts in the X6" and Z6" range. I have no idea why it's doing that and it crashes my carriage. The G code doesn't mention these coordinates so it must be some code. Please help. It does it for the first move.
Here's the code, oh I don't have any offsets set whatso ever I just zero the tool to the right coordinates. And I'm working in Inches. Oh and another thing the only werid setting I have is the IJ mode is set to absolute instead of incremental for my Dolphin CAM. Thanks.
G0 G40 G18 G80 G50 G90
G00 G53 X0.1 Z0.1
T202M6
G00 X1.795
G00 Z0.5
G00 X1.77
M03 S1000
M08
G76 X1.7316 Z-1 Q4 P0.03125 J0.001 L45 H0.01 I29 C0.025 B0.0001 T0
M9
M5
M30