Hello Guest it is June 17, 2019, 01:23:45 AM

Author Topic: Which CAD/CAM software for newbie  (Read 37187 times)

0 Members and 1 Guest are viewing this topic.

Offline RICH

*
  • *
  •  7,337 7,337
    • View Profile
Re: Which CAD/CAM software for newbie
« Reply #40 on: May 31, 2009, 05:29:59 PM »
Dave,
Good, i haven't fooled with it that much. Let me know what you think about it.
RICH

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: Which CAD/CAM software for newbie
« Reply #41 on: May 31, 2009, 07:05:22 PM »
Hi Rich,

Looked at the turn section and the tutorial "playback" they have, and while I haven't given it a fair shake, I'm not really diggin it much.

I don't really like the way things are implemented but that could just be me.

It's no LazyTurn  ;)

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline RICH

*
  • *
  •  7,337 7,337
    • View Profile
Re: Which CAD/CAM software for newbie
« Reply #42 on: May 31, 2009, 09:29:52 PM »
Dave,
Understand what your saying. Here's what is nice. You can go in a pick a particular section of a turned piece along the
Z axis staying outside or inside the undercut, make moves to a point, thus your not restricted. Now exactly how to do that stuff and the exact sequence along with tool definition is a different story. You need to get all the buttons and logic "Synergy" way of doing it down. I hacked away and was sucessfull, then douldn't duplicate what i did
( who takes notes when their hacking away), even posted code. How buggy it is, well who knows ( and they are all buggy!) and there is no forum to ask questions.
RICH  

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: Which CAD/CAM software for newbie
« Reply #43 on: June 01, 2009, 05:02:08 AM »
Quote
How buggy it is, well who knows ( and they are all buggy!) and there is no forum to ask questions.

Excellent point, and we all know how I need support...  :D

Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)