Hello Guest it is March 28, 2024, 06:09:53 AM

Author Topic: changing between mm and inch  (Read 2885 times)

0 Members and 1 Guest are viewing this topic.

changing between mm and inch
« on: April 13, 2009, 09:57:02 AM »
in mach 3 how can i change between mm and inches

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: changing between mm and inch
« Reply #1 on: April 13, 2009, 09:59:31 AM »
G20 is inch G21 metric. If you mean to have the machine set up as default in one or the other then you can set that from Config menu then Units. You will then need to retune motors if you change it, best a=lso to restart Mach after the changes.
Hood
Re: changing between mm and inch
« Reply #2 on: April 13, 2009, 10:40:10 AM »
ok thanks