Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: osman100 on April 13, 2009, 09:57:02 AM

Title: changing between mm and inch
Post by: osman100 on April 13, 2009, 09:57:02 AM

in mach 3 how can i change between mm and inches

Title: Re: changing between mm and inch
Post by: Hood on April 13, 2009, 09:59:31 AM

G20 is inch G21 metric. If you mean to have the machine set up as default in one or the other then you can set that from Config menu then Units. You will then need to retune motors if you change it, best a=lso to restart Mach after the changes.
Hood

Title: Re: changing between mm and inch
Post by: osman100 on April 13, 2009, 10:40:10 AM

ok thanks