Sure,
You can see a picture here:
http://www.fxmodel.it/fresa.jpgWorking area 1260 x 600 x 230mm
3 x Sanyo step motor 4A 3.5 Nm
3 x Micro step driver (italian made) up to 7A and up to 4000 steps/r
Pre loaded ball screw 20x5mm (I don't know if the translation is right)
1Kw 3 phase spindle, ceramic bb
Working speed (with mach3) up to 8000 mm/min (other software) up to 3500 mm/min
Rapid speed (with mach3) 10000 mm/min (other software) 6500 mm/min
Measured precision +/- 0.015mm
Bye Faby
FxModel