Hey guys, I thought I should tell you about a new version of Mach that will be coming out in the future. I have been testing it a little this evening. There have been many advances and enhancements made to Mach in the past year or so that aren't so obvious (behind the scenes stuff) to many of the users but this one you will get to see. It covers a lot of ground but the most noticeable is the tool path display. You can pan, zoom, rotate on the fly. Also you can pick different screen pages while running code with no problems and the toolpath will be the same on every page. Not saying it will be the same tool path, same size, etc. It will be showing the same in each instance though. You can have multiple work cord. showing at the same time and they will update on the fly. It is crazy fast as well. I tested 2 versions. One updating at 100 times a sec. and one at 50 times a sec. The one at 100 is so fast that if you change pages in the screen, it happens so fast you hardly know it. No lag at all, none. The feed rate over ride is crazy fast as well. You can't click your mouse as fast as it can respond. I will do some more testing and try to make a short video in the next week or so. I know I haven't worded this to reflect the huge advance this is but I'm sure time will speak volumes.
Excited to say the least,
Brett