Hi,
My machine has two motors on my X; the A is slaved to my X. All works well when jogging and cutting.
Today I decided to setup my limit switches. I'm using a PDMX-122. I used pin 11 and ground with Normally opened parallel switches. All works well so far.
I set X++, X-- and X Home to pin 11 Active Low. Switches work fine in diag window.
In the MotorHome/Soft Limits section I select Home Negative and Auto Zero to checkmarks.
When I try and to a home, it appears like only one of the motors on the X is actually turning, the other one tries to skip the rack (spring loaded).
Do I have to set another limit for the A-Azis (slaved axis) to work in tandem with the X-axis? Is there another setting that I am missing?
(jogging and normal cutting work great)
Any help appreciated.
Thanks, Greg