Hello Guest it is March 29, 2024, 05:44:30 AM

Author Topic: Newbie project  (Read 4084 times)

0 Members and 1 Guest are viewing this topic.

Newbie project
« on: February 14, 2009, 09:12:33 PM »
OK   I was asked to post some pictures of my newbie project, so here they are. 

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: Newbie project
« Reply #1 on: February 16, 2009, 07:41:26 AM »
That's looking good - what are you going to make with it ?. Don't forget to post pics of your work.

Tweakie.
PEACE
Re: Newbie project
« Reply #2 on: February 16, 2009, 06:51:47 PM »
Just messing around,  I am working on cutting 3d pictures of the kids.  And then I find out that Mach3 is limited to 400 lines and the pictures are way more than that so I need to reg the program or use something else.   So far I made the roadrunner sample file, After this weekend I might have more made

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: Newbie project
« Reply #3 on: February 17, 2009, 02:48:56 AM »
From my experience of other programs Mach far exceeds their versatility. If you you purchase Mach you won't regret it.
Good luck with your carvings.

Tweakie.
PEACE

Offline Sam

*
  • *
  •  987 987
    • View Profile
    • hillbillyhilton.com
Re: Newbie project
« Reply #4 on: February 17, 2009, 05:16:06 PM »
Neat looking machine you have fabricated there. Hopefully you will get lots of enjoyment out of it. Once you make a few things and see the endless possibilities, you will have "the fever". Currently, there is no cure. I have to agree with super kitty, Mach is ahead of the ballgame compared to others.
"CONFIDENCE: it's the feeling you experience before you fully understand the situation."