Machsupport Forum

General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: mattsaloeltjen on February 14, 2009, 09:12:33 PM

Title: Newbie project
Post by: mattsaloeltjen on February 14, 2009, 09:12:33 PM

OK   I was asked to post some pictures of my newbie project, so here they are. 

Title: Re: Newbie project
Post by: Tweakie.CNC on February 16, 2009, 07:41:26 AM

That's looking good - what are you going to make with it ?. Don't forget to post pics of your work.

Tweakie.

Title: Re: Newbie project
Post by: mattsaloeltjen on February 16, 2009, 06:51:47 PM

Just messing around,  I am working on cutting 3d pictures of the kids.  And then I find out that Mach3 is limited to 400 lines and the pictures are way more than that so I need to reg the program or use something else.   So far I made the roadrunner sample file, After this weekend I might have more made

Title: Re: Newbie project
Post by: Tweakie.CNC on February 17, 2009, 02:48:56 AM

From my experience of other programs Mach far exceeds their versatility. If you you purchase Mach you won't regret it.
Good luck with your carvings.

Tweakie.

Title: Re: Newbie project
Post by: Sam on February 17, 2009, 05:16:06 PM

Neat looking machine you have fabricated there. Hopefully you will get lots of enjoyment out of it. Once you make a few things and see the endless possibilities, you will have "the fever". Currently, there is no cure. I have to agree with super kitty, Mach is ahead of the ballgame compared to others.