I changed the above code to "If GetOEMLED(164)..." and "If GetOEMLED(165)..."
When I type in M3 or M4 into the MDI, my relays energize less than one second. How can I make it stay on?
The above was earlier today. By checking "Immediate Relay Off Before Delay", I was able to at least get one of the relays to energize. It is very weird though:
If I type in M3 at the MDI, Relay CW energizes less than one second, then immediately shuts off and energizes Relay CCW (m4). It won't shut off until I send command M5.
If I type in M4, Relay CCW energizes less than one second, and shuts off.
Now, if I un-check "Immediate relay off before delay", I get the same result... very weird.