Hello Guest it is March 28, 2024, 06:53:12 PM

Author Topic: Blinking "Current State" LED's  (Read 6984 times)

0 Members and 1 Guest are viewing this topic.

Blinking "Current State" LED's
« on: January 08, 2009, 08:25:03 PM »
Hello,
   On the Diagnostics screen.
Output Signals current State LED's flash or blink when active.
Is there a reason why they do not just stay on constantly when active ?
Is there a simple way to change them so they do ?
Thanks,
RC

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Blinking "Current State" LED's
« Reply #1 on: January 08, 2009, 08:28:53 PM »
You can change that with screen4, just double click the LED in question and choose a non flashing one.
Hood

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Blinking "Current State" LED's
« Reply #2 on: January 08, 2009, 08:29:05 PM »
Open the screen in Screen4, and go to that page. Right click on the LED, and you'll see it says red flashing in the upper right side of the window. From the drop down list, pick a different option, like red. Save when done.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Blinking "Current State" LED's
« Reply #3 on: January 08, 2009, 08:30:49 PM »
Beat me by 12 seconds.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Blinking "Current State" LED's
« Reply #4 on: January 08, 2009, 08:31:41 PM »
yep but every second counts ;D
Hood

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Blinking "Current State" LED's
« Reply #5 on: January 08, 2009, 08:34:33 PM »
I think it's because you have an 8 hour head stat on me. :)
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Blinking "Current State" LED's
« Reply #6 on: January 08, 2009, 08:37:29 PM »
Dang...I've been at this monitor too long. I'm beginnin' ta see DOUBLE.
Come to think of it, I've put LED's on a screen before   Duhuhuh
Yeah...I knew that.
Thanks to all 4 of ya,
RC
Re: Blinking "Current State" LED's
« Reply #7 on: January 08, 2009, 08:38:41 PM »
8 hours and 30 years.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Blinking "Current State" LED's
« Reply #8 on: January 08, 2009, 08:39:08 PM »
I think it's because you have an 8 hour head stat on me. :)
Always thought you USA guys were backwards ;D
Hood

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Blinking "Current State" LED's
« Reply #9 on: January 08, 2009, 08:40:36 PM »