Hello,
   On the Diagnostics screen.
Output Signals current State LED's flash or blink when active.
Is there a reason why they do not just stay on constantly when active ?
Is there a simple way to change them so they do ?
Thanks,
RC

You can change that with screen4, just double click the LED in question and choose a non flashing one.
Hood

Open the screen in Screen4, and go to that page. Right click on the LED, and you'll see it says red flashing in the upper right side of the window. From the drop down list, pick a different option, like red. Save when done.

Beat me by 12 seconds.

yep but every second counts
Hood

I think it's because you have an 8 hour head stat on me.

Dang...I've been at this monitor too long. I'm beginnin' ta see DOUBLE.
Come to think of it, I've put LED's on a screen before   Duhuhuh
Yeah...I knew that.
Thanks to all 4 of ya,
RC

8 hours and 30 years.

I think it's because you have an 8 hour head stat on me.

Always thought you USA guys were backwards
Hood

8 hours and 30 years.

Just 30?