Hello Guest it is March 29, 2024, 10:39:55 AM

Author Topic: Mach3 R3.042.020  (Read 5588 times)

0 Members and 1 Guest are viewing this topic.

Mach3 R3.042.020
« on: January 03, 2009, 08:35:12 AM »
I tried the new lockdown version of Mach3,  R3.042.020,  and found that it will not allow a correct Z start for the "Run From Here"
Option. It goes to the correct X and Y and then the Z moves into the positive direction until it reaches the Z+ limit. It seems to ignore the Z data in the program?  Does any one else have this happen? I switched back to Mach 2.********* and ran my parts?
Danny

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach3 R3.042.020
« Reply #1 on: January 03, 2009, 08:59:08 AM »
Sounds like you may be having issues with the safe Z position. Can you attach your xml and I will have a look.
Hood
Re: Mach3 R3.042.020
« Reply #2 on: January 04, 2009, 10:33:45 AM »
Thanks Hood!

I changed the Safe Z to 1 inch and it fixed it!

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach3 R3.042.020
« Reply #3 on: January 04, 2009, 10:43:03 AM »
Great and thanks for letting me know :)
Hood